How to Properly Setup a 2 Axis Joystick

After buying a 2 axis joystick, you have to get it set up properly in order to get the best performance. What you need to understand is that setting up a 2-axis joystick can vary depending on the specific type of joystick you bought and the hardware and software you are using. However, there are some general steps that can help you properly set up a dual-axis joystick. We will be taking a look at these steps.

  • Choose your joystick: The very first step is to choose a joystick that fits your requirements. As you search the market for a 2 axis joystick, you have to keep in mind that these devices are not built the same. The rule of thumb when it comes to industrial joysticks is to look for a 2-axis joystick that has an analog output. This means it can output continuous values for each axis.


  • Connect the joystick: Connect the joystick to your computer or microcontroller board. Typically, this involves connecting the X and Y axis outputs to analog input pins, and the ground and power pins to the appropriate pins on your board. The process is not as complicated as standard joysticks. All you need is to plug in the desktop controller into your system. This can be done using a USB cable or a wireless connection.
  • Calibrate the joystick: Once the joystick is connected, the first thing you need to do is calibrate it. You need to determine the range of values that the joystick can output for each axis. You can use a program like Joystick Test or a similar utility to help you with this calibration process. Some joysticks come with an installation disk that helps with the calibrations.


  • Test your joystick: The final step involves testing the joystick to make sure it is working correctly. Move the joystick in different directions and observe how your project responds. If the joystick is not working correctly, double-check the connection and re-calibrate it.

Overall, setting up a dual-axis joystick requires careful calibration and mapping of the analog values output by the joystick to the range of values needed to control your project. With the proper calibration, you can create a responsive and reliable joystick controller for your project. If you are not sure what needs to be done, consider speaking with an experienced technician to help with the installation and calibration of the joystick. Proper installation is what will make you more efficient in your work. Do not take shortcuts.

2 Axis Joystick